The small batch brewers dream pump! The Anvil Brewing Pump is perfect for recirculating and transferring wort. This economical pump is packed with features for an affordable price. Ideal for recirculation and transferring, the Anvil Brewing Pump has a head that is easily disassembled without the need for tools! It has an inlet and outlet that accept 1/2 in. tubing, which means this pump can be used in a plethora of brewing systems with standard 1/2 in. barbed connections! Easily turn the pump on and off with an in-line switch, making this pump a breeze to use! Tool-free Disassembly. Quiet Operation. In-line Switch 6 ft. Cord Sized for 1/2 in. Hoses. Max Flow - 3 GPM Max Lift - 7 ft Voltage - 120V 60Hz Current - 0.75A
The BrewBuilt Chilling Pump Kit includes everything you need to push glycol or ice water through your chilling coil or jacketed tank. It includes an Inkbird temperature controller to make it easy to hold your temps. Available with either a 800 or 1300 GPH submersible pump. In general we recommend the 800 GPH pump for use with any batch size fermentation less than 10 gallons, and the 1300 GPH pump for any batch size fermentation between 10 gallons and 2 bbl. Kit Includes: Submersible Pump Inkbird Dual Stage Digital Temperature Controller 2x 5 ft. lengths of 3/8" SiliconeTubing 4x Butterfly Hose Clamps Stainless 3/8" Barb x 1/2" MPT
An amazing little pump from "down under". It has been used in the Australian market for years where it has a good reputation. Works like a March or a Chugger but with a sealed case that is more water resistant. The pump head can be rotated in 60-degree increments, allowing for 6 different pump head orientations. The included stainless steel head is a very nice upgrade. Includes Stainless Steel pump head for the MKII pump AND spare standard high temp polysulphone head! Specifications: Made from Polysulfone 110v/60hz 11.15 ft. (3.4 m) max head 5 Gal/min max flow Rotatable pump head Max temperature - 248 F/ 120 C 1/2 inch fittings
Stainless Steel pump head updgrade for the MKII pump, sku PMP500. With the pump (that inlcudes standard polysulphone head) and this stainless head you are still looking at a retail price point under $99.
This is a submersible pump is perfect for use with a glycol chiller or icebank. It has a small, compact design but can still push up to 800 gallons per hour. Comes with interchangeable 1/2 in. and 3/4 in. plastic barbs. We recommend this pump for maintaining the temperature of any batch size fermentation that is less than 10 gallons. Maximum flow rate: 800 GPH Max lift height: 9 ft. Comes with 2 barb fittings - 1/2" & 3/4" High quality 60W motor runs quiet Stainless steel impeller shaft 6 ft. long power cord