The DigiMash is one of the most affordable options in all-grain electric brewing. Includes 35L DigiBoil, false bottom, malt pipe with bottom screen, wire support, and malt pipe handle.

This model runs off 110V power and has dual heating elements (1000w and 500w) that can be controlled independently. Includes 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2").

DigiBoil Features:

304 stainless steel construction
9 gallon total capacity
Digital temperature control
110V / 15A power and plug (5 ft. cord)
Stamped-in volume markers (gallons & liters)
Temperature reads in °F or °C
- With elements turned off, hold both +/- buttons to switch between °F or °C
Recommended max. grain bill - 18 lbs
Recommended min. grain bill - 8 lbs
External Dimensions: 29" H x 15" W (including handles)
Internal Dimensions: 19.5" H x 11.75" W

Mash Upgrade Includes:

False bottom
Malt pipe
Wire support
Malt pipe handle
Malt pipe bottom screen

Installation & Use:

Place the false bottom inside the kettle
Install the wire support in the channel located at the top of the kettle
Place the mesh screen inside the malt pipe and attach the handle
Lower the malt pipe into the kettle so it rests on the wire support
Fill with strike water and heat to desired strike temperature
When desired temperature is reached, add grain and stir until well mixed
When your mash is complete, use the handle to lift out malt pipe and rotate 90° so the malt pipe feet sit on the wire support
Allow the wort to drain into the kettle and sparge the grain with warm water (165-175°F)
When you're done collecting your wort, remove the malt pipe and proceed to boil

Good to have you here!