Use the Duotight Flow Stopper while filling kegs, during keg to keg transfers, or fermenter to keg transfers to automatically cut off the flow when the keg is full. Simply attach this device to the output gas post of your keg, then when the keg is full it will prevent further liquid exiting the gas post.
The Flow Stopper pairs perfectly with the BlowTie Spunding Valve, which will enable you to apply head pressure to the keg. This allows you to control the flow speed and reduce the foam generated in the filling process. You will need a short length of 8 mm OD EVABarrier tubing to connect the BlowTie to the outlet of the Flow Stopper.
Includes:
2 x Duotight 8 mm x 5/8" FPT (DUO104)
1 x Duotight 8 mm elbow (DUO107)
1 x Duotight 8 mm x 1/4 in. flare (DUO106)
1 x Ball float
1 x Stainless spring
2 x 8 mm OD EVABarrier joiners
1 x Acrylic sight glass
Ball lock fitting and BlowTie spunding valve not included.
The Brewer's Best/Vintner's Best Brew Belt is an ideal heat source for consistent fermentation. This 15-watt belt is designed to fit most primary and secondary fermenters, and can easily maintain a target fermentation temperature between 70-75 degrees Fahrenheit. The Brew Belt is an essential tool for serious brewers and vintners.
Made of high quality durable plastic, this Italian spigot is perfect for fermenters. Easily assemble and disassemble for cleaning and preparation. To install, drill a 1” hole into your bucket and screw in. It’s that easy! For easier bottling, attach a 3/8” I.D. tube. Includes 2 rubber gaskets for an airtight seal.
Our .5 micron carb stone is ideal to force carbonate your kegged beer, or as an aeration stone prior to fermentation. The barb is 1/4" OD.To Use: Attach 2 feet of 1/4" tubing from the "gas in" dip tube inside the keg. (Tubing not included). You set your desired pressure on the regulator and gas gets emitted through the .5 micron stainless stone. The bubbles rise through the beer creating so much surface area contact between gas and liquid that the absorption rate is very rapid. This is very similiar to how beer is carbonated in breweries.316 Stainless1/2" diameter. Stone is 1" in length. Overall length is 1 7/8"Sanitizing your Diffusion Stone:To properly sanitize your stones, we recommend you run it in a sanitized solution for 5 minutes. If the stone becomes clogged we recommend boiling the stone for 1-3 minutes to help break down anything within it.If boiling is not an option, we recommend soaking in Star San. Star San will remove a majority of surface contamination/bacteria, but will not sanitize the interior of the stone which may or may not be contaminated.Please note that you do not want to touch the stainless stone portion with your hands. The oils on your fingers can actually clog the small pores in the stone.
Use this 2 micron oxygen stone with an oxygen source or aeration pump to provide your yeast with oxygen pre-fermentation. The barb is 1/4" OD. (Note: if you are using an aeration pump, we recommend a "deep water" type for aquariums, as these will have the necessary PSI to force the air through the stone and into the wort)316 Stainless1/2" diameter. Stone is 1" in length. Overall length is 1 7/8"Sanitizing your Diffusion / Carb Stone:To properly sanitize your stones, we recommend you run it in a sanitized solution for 5 minutes. If the stone becomes clogged we recommend boiling the stone for 1-3 minutes to help break down anything within it.If boiling is not an option, we recommend soaking in Star San, which will remove a majority of surface contamination/bacteria, but will not sanitize the interior of the stone which may or may not be contaminated.Please note that you do not want to touch the stainless stone portion with your hands. The oils on your fingers can actually clog the small pores in the stone.
This 38 mm Screw Cap with Airlock Hole allows for an airlock to be used directly on the standard jug lid. It features 38 mm threads and a 3/8 inch hole for an airlock, ensuring a secure and airtight fit. Thanks to this secure connection, brewers can ensure that their jugs are well-ventilated.
This Standard Carboy Cap is designed to fit standard 3, 5, 6, or 6.5 gallon glass carboys. The fitted cap sits over the carboy's mouth, and a racking tube can be inserted through the center spout for convenient priming of a siphon. Perfect for home brewers or winemakers.
Transfer your large batches with confidence using the 8" Plastic Funnel. Its large size is perfect for transporting 5 gallon batches with ease, allowing you to work faster and smarter. This funnel is the ideal companion for any of your large-scale liquid transfer needs.
Wide diameter funnel for large volume pouring. Inner groove can be used to install a funnel screen. Smooth inner surface for easy cleaning and sanitizing.
Food grade plastic
BPA free
Max Temp Rating: 158°F (70°C)
This 4.5" Plastic Funnel is the perfect tool for small projects. With an Italian-made Ferrari construction and a size designed to fit into beer and wine bottle necks, this funnel makes filling bottles or Erlenmeyer flasks a breeze. Ideal for shaking up yeast starters or carbonating your own soda.
This 38mm Metal Screw Cap is the perfect solution for securely sealing your growlers and wine jugs. Constructed with durable metal, this 38 mm (28/400 thread) standard size cap ensures a tight fit and reliable seal. Whether you're looking to store beer, wine, or other beverages, our metal screw cap is the ideal choice.
This 38 mm Screw Cap with Airlock Hole allows for an airlock to be used directly on the standard jug lid. It features 38 mm threads and a 3/8 inch hole for an airlock, ensuring a secure and airtight fit. Thanks to this secure connection, brewers can ensure that their jugs are well-ventilated.
This Plastic Funnel is perfect for home labs and commercial workshops. With its 10 inch top, you can quickly and easily transfer liquids and solids into containers. Plus, its groove at the base accommodates a filter screen, making it easier for you to sift out contaminants.
This 10" Anti-Splash Funnel is a great choice for safely transferring liquids. Its narrow spout and flared lip reduce the chance of spilling, allowing for smoother liquid transfer. Its non-stick surface makes cleaning and maintenance stress-free. Perfect for industrial or home use.
Mark’s Mark II Keg Washer™ is designed to clean and sanitize large vessels like cornelius kegs and carboys. It is also intended to provide a sanitation container for miscellaneous items such as airlocks, thermometers, tubing, keg fittings, and more.
This carboy handle offers a secure, over-the-shoulder carrying solution for 3 - 6 gallon carboys. The ergonomic design ensures a comfortable grip and eliminates accidental spills and drops. Made of sturdy steel, this handle is a reliable choice for those transporting glass carboys.
The Carboy Dryer is the perfect tool for safely and efficiently drying large bottles and carboys. It features an adjustable clamping arm and adjustable roller height, allowing you to securely accommodate different sizes for a perfect fit. The roller control knob allows you to quickly adjust the tension and control the speed of rollers. This dryer provides a safe and effective way to quickly dry and store large bottles and carboys.
The Carboy Brush is an essential tool for any home brewing operation. Its long handle makes it easy to reach the bottom of carboys and its durable bristles make it ideal for effortless scrubbing and cleaning of brewing equipment. Great for both professional and amateur brewers.
The Jet Carboy & Bottle Washer is an excellent solution for cleaning any size bottle or carboy. Simply attach the washer to a faucet and invert your container over the washer's spout. A powerful stream of water is directed up into the inverted container, cleaning in seconds. The stream automatically shuts off when the container is removed. The washer natively fits garden hose thread faucets. The quality, all-brass construction of the Jet Carboy & Bottle Washer comes with a manufacturer's lifetime guarantee.
