We are open Monday to Friday from 1 PM to 6 PM and Saturday from 10 AM to 2 PM

Kegging

Kegging

36 productos

  • Duotight BlowTie 2 | Diaphragm Spunding Valve | Built-In Pressure Gauge | 0-15 PSI

    Duotight BlowTie 2 | Diaphragm Spunding Valve | Built-In Pressure Gauge | 0-15 PSI

    No disponible en stock

    The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing (D1717 or D1718). The BlowTie 2 features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-15 psi WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge.

    No disponible en stock

    $24.99

  • Venta -31% Duotight BlowTie 2 | Complete Kit | Diaphragm Spunding Valve | Built-In Pressure Gauge | 0-15 PSI | 8 mm Duotight | CM Becker Ball Lock Quick Disconnect QD

    Duotight BlowTie 2 | Complete Kit | Diaphragm Spunding Valve | Built-In Pressure Gauge | 0-15 PSI | 8 mm Duotight | CM Becker Ball Lock Quick Disconnect (QD)

    No disponible en stock

    The BlowTie 2 Spunding Valve complete kit is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. The blow off pressure can be easily set using the BlowTie's integrated pressure gauge. The kit includes everything you'll need to use the spunding valve right out of the bag. Kit Includes: BlowTie 2 w/ Integrated Pressure Gauge (0-15 psi) CM Becker Gray Ball Lock Disconnect Duotight Flare Fitting 8 mm OD Rigid Plastic Joiner

    No disponible en stock

    $41.96$28.99

  • Venta -37% Duotight BlowTie | Complete Kit | Diaphragm Spunding Valve | Triple Scale Pressure Gauge | 0-40 PSI

    Duotight BlowTie | Complete Kit | Diaphragm Spunding Valve | Triple Scale Pressure Gauge | 0-40 PSI

    No disponible en stock

    The Blow Tie Spunding Valve complete kit is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. The blow off pressure can be easily set using the included Push-In Pressure Gauge. The kit includes everything you'll need to use the spunding valve right out of the bag.   Kit Includes: BlowTie Pressure Gauge (0-40 psi) Ball Lock Disconnect Duotight Tee & Flared Duotight Fitting 2x Lengths of EVABarrier 8mm OD Tubing

    No disponible en stock

    $45.94$28.99

  • Duotight In-Line Regulator | Built-In Pressure Gauge | 0-60 PSI | Liquid & Gas Compatible | 8 mm Duotight

    Duotight In-Line Regulator | Built-In Pressure Gauge | 0-60 PSI | Liquid & Gas Compatible | 8 mm Duotight

    5 en stock

    The Duotight In-Line regulator works with both gas and liquid. Easily adjust the flow can be adjusted with the yellow adjustment knob. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing.  Features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-60 psi Made with quality EPDM seals Wall mountable WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge.

    5 en stock

    $22.99

  • Push-In Pressure Gauge 0-40 psi - 5/16" 8 mm

    Push-In Pressure Gauge 0-40 psi - 5/16" (8 mm)

    This push-in pressure gauge comes with an 8 mm (5/16 in.) barb and is specifically designed to be compatible with 8 mm Duotight fittings. It's the ideal companion to the BlowTie Diaphragm Spunding Valve, allowing you to dial in your blow off setting for pressure fermentations or pressure transfers. Triple-scaled to read in psi, bar, and kPa.

    $8.99

  • Venta -9% Cannular Bench Top w/ Power Adapter

    Cannular Bench Top w/ Power Adapter

    No disponible en stock

    The Cannular is a manual can seamer that is easy to use, reliable, and beautifully simple. Whether you're a brewery looking to offer canned beer to go or a homebrewer wanting to keep your creations fresh and fully protected from light, the Cannular is the answer. This bench top unit is one of the most compact and easy to use can seamers you'll find. The Cannular only requires one person to operate, and each can takes roughly 5 seconds to seam. With a two-person team, one filling and one seaming, the Cannular becomes a suitable option for nano breweries doing small canning production runs. Operation:The beauty of the Cannular lies in how truly simple it is to operate. With only three points of operation, it only takes a few minutes to familiarize yourself with the machine.The seaming process is as follows: Place lid atop the can and place the can on the table spacer Turn the platform lever clockwise to raise the can to the seamer Press the button to turn the machine on and begin spinning the can Push the seaming lever away from you and hold for 1-2 seconds Pull the seaming lever towards you and hold for 1-2 seconds Press the button to turn off the machine and stop spinning the can Turn the platform lever counterclockwise to lower the can

    No disponible en stock

    $624.98$569.99

  • CMBecker Ball Lock Quick Disconnect QD | Gas In | Flared | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA

    CMBecker Ball Lock Quick Disconnect (QD) | Gas In | Flared | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA

    Plastic quick disconnects for ball lock Cornelious-type kegs.Gray quick disconnects are used for the gas in tank plug.1/4 inch male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.

    $8.99

  • KOMOS® Draft Multi Tool with Duotight Remover 7 in 1

    KOMOS® Draft Multi Tool with Duotight Remover (7 in 1)

    4 en stock

    The KOMOS® Draft Multi Tool with Duotight Remover provides all the necessary tools to maintain a draft system. Featuring a CO2 regulator nut spanner, shank hex nut spanner, faucet coupling ring pin wrench, flare swivel nut spanner, and mm Duotight removal capabilities, this compact, 7-in-1 tool is designed for maximum efficiency and convenience. Get the job done quickly with this reliable and dependable draft tool. CO2 Regulator Nut Spanner Shank Hex Nut Spanner Faucet Coupling Ring Pin Wrench Flare Swivel Nut Spanner mm Duotight Removal

    4 en stock

    $6.99

  • Blichmann BeerGun™ V2

    Blichmann BeerGun™ V2

    No disponible en stock

    Powered by Quiescent Flow Technology™, this revolutionary bottle filler eliminates the complicated and time-consuming operation of traditional counter-pressure fillers while maintaining their primary functions—purging with CO2, preventing oxygen pickup, and filling with minimal foaming and carbonation loss. Pair that with its auto-fill level and ability to fill bottles of any depth without modification, and the BeerGun® becomes a clear standout. Key features include: One-handed, intuitive operation Simpler operation than counter-pressure fillers Easy to set up and clean Everything that touches your beer is stainless steel Low-foaming outputs Great for kegs or bottling buckets Works for wine-makers The BeerGun® takes aim at the common problems of counter-pressure fillers and offers one-of-a-kind solutions powered by our patented Quiescent Flow Technology™. Turbulence and sudden changes in pressure can create unwanted foaming. The unique design of Blichmann's BeerGun® gradually reduces beer from keg pressure to atmospheric pressure with little turbulence and provides a consistent bottle fill level every time. While competitors place their valves at the top of the filler and force beer down an empty tube each time, we've placed our non-throttling, quick-acting valve at the bottom of the BeerGun® so it is quickly immersed in the beer, keeps the stem full, and reduces pressure changes and turbulence. These features plus the CO2 jacketing tube for bottle purging and ergonomic valve actuators make filling bottles faster, easier, and more precise.

    No disponible en stock

    $110.00

  • New Replacement Corny Keg Soda Keg Lid

    New Replacement Corny Keg (Soda Keg) Lid

    No disponible en stock

    We love these keg lids as either a replacement or an upgrade to the stock lid featured on many homebrew kegs. Most homebrew kegs feature a straight, parallel bale that sits extemely close to the lid when in the closed position. So close that it can be hard to get a finger or two under the bale to open it. The arms on this lid bend outward creating a nice, easy-to-grip handle to open and close the bale. For use with Torpedo, Cornelius, and Firestone kegs. Comes with a pull-ring pressure relief valve and o-ring. PRV rated to 85 psi.

    No disponible en stock

    $21.99

  • Party Star Keg mini keg w/tap

    Party Star Keg (mini keg) w/tap

    3 en stock

    Our 5 Liter Mini Keg is a beautiful brushed silver metal. Comes pre-equipped with a gravity tap and two piece bung. This keg also can be perfectly paired with our Party Star Deluxe Tap, which fits easily into the hole on the top of the keg. If that type of tap is used then CO2 will be used in place of priming sugar or carbonation tabs. Perfect to take home brewed beer or soda to the beach or a picnic!

    3 en stock

    $19.50

  • EVABarrier Tubing - 5 mm ID x 8 mm OD - By the Foot

    EVABarrier Tubing - 5 mm ID x 8 mm OD - By the Foot

    No disponible en stock

    EVABarrier double wall tubing is an excellent choice for all draft dispensing applications. The inner barrier is an excellent gas barrier, keeping oxygen out and CO2 in. The inner wall is also extremely smooth to prevent bacteria and other microbes from attaching to the inside surface. The outer barrier gives the tubing a decent stiffness while still remaining pliable. This makes EVA Barrier remarkably kink resistant and the perfect choice for use with Duotight, John Guest, and other push-in fittings.   The 5 mm (13/64") ID size is perfect for draft applications where a longer beverage line is needed. We recommend using 10-12 ft. per line for adequate flow resistance.   Specifications: Inner Diameter - 5 mm (13/64") Outer Diameter - 8 mm (5/16") 12 m Roll (39 ft.) PVC, BPA , and Plasticizer Free* Outer wall prevents oxidation and CO2 loss Smooth inner wall prevents microbial growth build-up  *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects.

    No disponible en stock

    $1.99

  • Draft Tubing 5/16" ID

    Beverage Tubing - 5/16 in.

    $0.99

  • Hygiene Plug - Beer Faucet Brush - Pack of 3

    Hygiene Plug - Beer Faucet Brush - Pack of 3

    Introducing Hygiene Plug: the ideal solution for keeping your beer taps clean and sanitary. This set of 3 taps caps are designed to protect taps from bacteria and contamination when not in use. Hygiene Plug also eliminates the need for wrapping taps overnight, saving time and resources. Made from stainless steel 304 brush wire for enhanced durability, it fits almost all beer tap types. Keep your taps safe and bug free with Hygiene Plug.

    $6.99

  • Plastic Picnic - Squeeze Faucet

    Plastic Picnic - Squeeze Faucet

    The Plastic Picnic Squeeze Faucet is an ideal solution for beer line dispensing. Crafted from black plastic, these picnic taps come with a barb designed for 1/4 inch ID beer line for controlled pouring. A reliable and durable choice, it is widely known as Cobra taps or hand taps.

    $8.99

  • Duotight Ball Lock Quick Disconnect QD - Gas In - 8mm

    Duotight Ball Lock Quick Disconnect (QD) - Gas In - 8mm

    The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world.  Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required. Duotight Ball Lock QDs are offered in three sizes that correspond to the outer diameters seen on our line of EVABarrier Draft Tubing.  Features: Ball Lock Quick Disconnect - Gas In Direct connect EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Disassemble by hand for quick and easy cleaning

    $9.99

  • Duotight Push-In Fitting - 8 mm 5/16 in. x 1/4 in. Flare

    Duotight Push-In Fitting - 8 mm (5/16 in.) x 1/4 in. Flare

    This Duotight fitting with 1/4" Flare is perfect for flared gas and beverage ball lock and pin lock disconnects. It can also be used to connect gas line to the flare fitting found on the KOMOS® CO2 Regulator. Compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)  Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Ball lock fitting and regulator not included.

    $5.99

  • CMBecker Ball Lock Quick Disconnect QD | Beverage Out | Flared | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA

    CMBecker Ball Lock Quick Disconnect (QD) | Beverage Out | Flared | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA

    Plastic quick disconnects for ball lock Cornelius-type kegs.Black quick disconnects are used for the liquid out tank plug.1/4 inch male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.

    $8.99

  • Duotight In-Line Regulator | 0-150 PSI | Liquid & Gas Compatible | 8 mm Duotight

    Duotight In-Line Regulator | 0-150 PSI | Liquid & Gas Compatible | 8 mm Duotight

    These regulators work great for reducing your mains pressure from 0-150 psi. Suitable for both gas and liquid. 8 mm Duotight inlet and outlet compatible with EVABarrier tubing. Handy tee bar adjustment. Specifications: Pressure Range: 0–150 psi Suitable for mains water pressure Liquid and gas compatible Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Wall mountable Made from non-corrosive acetyl, nitrile, and stainless parts

    $15.99

  • Duotight Ball Lock Quick Disconnect QD Beverage Out - 8mm

    Duotight Ball Lock Quick Disconnect (QD) Beverage Out - 8mm

    The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world.  Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required. Duotight Ball Lock QDs are offered in three sizes that correspond to the outer diameters seen on our line of EVABarrier Draft Tubing.  Features: Ball Lock Quick Disconnect - Bev Out Direct connect EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Dissamble by hand for quick and easy cleaning

    $9.99

  • Hygiene Plug - Beer Faucet Brush

    Hygiene Plug - Beer Faucet Brush

    Introducing Hygiene Plug: the ideal solution for keeping your beer taps clean and sanitary. This set of 3 taps caps are designed to protect taps from bacteria and contamination when not in use. Hygiene Plug also eliminates the need for wrapping taps overnight, saving time and resources. Made from stainless steel 304 brush wire for enhanced durability, it fits almost all beer tap types. Keep your taps safe and bug free with Hygiene Plug.

    $1.99

  • Ball Lock Quick Disconnect Gas In - Barb

    Ball Lock Quick Disconnect Gas In - Barb

    White, gas in quick disconnect with barb for gas line.Barb is 1/4". 1/4" or 5/16" beverage tubing is recommended for gas line.Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on and off" a cornelius keg. We recommend spraying the body connect on the keg first with a sanitizer solution which acts as a lubricant. When applying the ball lock fitting to the body connect, give a twist and turn to make it easier to connect. We've coined this term "Lube and Turn".

    $8.99

  • Venta -24% Low Profile Duotight BlowTie | Complete Kit | Diaphragm Spunding Valve | Triple Scale Pressure Gauge | 0-40 PSI

    Low Profile Duotight BlowTie | Complete Kit | Diaphragm Spunding Valve | Triple Scale Pressure Gauge | 0-40 PSI

    No disponible en stock

    Pressure Fermentation Pressure fermentation is becoming more and more popular at the homebrew level, but in order to do it safely and accurately, you need a way to release excess pressure. You'll pressurize your vessel to your desired psi, but once fermentation begins and those hungry, active yeast start creating CO2, the pressure inside the vessel will increase. Attach a spunding valve and set it to your desired pressure, and it will blow off when the pressure gets to high and close up again when it's back to your desired psi. Pressure Transfers Even if you don't have a pressurizable fermenter, you may have done pressure transfers from keg to keg during filtering or after fining. During pressure transfers, it's a good idea to have a bit of head pressure in the receiving keg, especially if you're transferring beer that is already carbonated. Having a spunding valve in place will allow you to consistently control the head pressure and give you more consistent results, without losing carbonation in the process. Diaphragm vs. Poppet With the poppet style spunding valve, a spring pushes against a poppet to keep the valve closed. When the poppet lifts up to open, the surface area the gas pushes against becomes larger, and the spring has to work harder to push the poppet down and reseal the valve. This can lead to more gas being released than intended, and the remaining pressure in your vessel may be at a lower psi than your spunding valve’s set psi. Instead of a poppet, the spring inside the BlowTie pushes against a diaphragm, which has an immensely larger surface area. This means the surface area that the gas pushes against while the diaphragm is closed is significantly closer to the surface area it pushes against when the diaphragm is open. This leads to higher accuracy, and the remaining pressure after excess gas is released will be much closer to your set blow off pressure. With this complete kit you'll be ready to use the BlowTie Spunding Valve right out of the box. Release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers Much more accurate than the spring and poppet style, and works much better at lower pressures. Kit Includes: BlowTie, Pressure Gauge, Ball Lock Disconnect, Duotight Tee & Flared Duotight Fitting, 2x Lengths of EVABarrier 8mm OD Tubing

    No disponible en stock

    $40.95$30.99

  • Duotight - 8mm 5/16 Elbow

    Duotight - 8mm (5/16) Elbow

    4 en stock

    This Duotight elbow fitting is compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

    4 en stock

    $3.99

Ingresa en

¿Ha olvidado su contraseña?

¿Aún no tienes una cuenta?
Crear una cuenta