Additives & Spices
Malic Acid - 1Lb
Malic Acid is a must-have for making wine and beer. It is a tart, green-apple-flavored acid used to add sourness and balance out sweetness in beer and wine. With 1Lb of Malic Acid, you'll have plenty of flavor for your own home brew.
$14.99
-
Campden Tablets - 2 oz
Campden tablets are a primary source of potassium metabisulphite, a preservative used in wine and beer making. These tablets are designed to help reduce levels of wild yeast and bacteria in your brews, protecting the flavor of your handcrafted beverages. 2 oz of Campden tablets provides the necessary preservative for up to 5 gallons of liquid.
$4.99
-
Tartaric Acid - 1 Lb
Tartaric acid is a food-grade acid used in wine making to enhance flavor, inhibit bacteria, and preserve taste. This one pound bag of tartaric acid is also used in pharmaceuticals, cosmetics, industrial products, and textiles. Tartaric acid is an essential ingredient for quality wine making.
$16.99
-
Gypsum (Calcium Sulphate) - 1 Lb
Used in beer making as a water treatment. Gypsum increases hardness and lowers pH. Its use is known to increase the perception of hop flavor compounds in beer. The primary salt used to Burtonize water; Burton water is famous for producing the worlds classic pale ales, such as Bass. Used in winemaking to lower the pH of the must. As calcium sulfate is not removed from water by boiling, when present, it is referred to as permanent hardness. Usage varies depending upon your exact water profile. Additions can range significantly based off your water source. Usage below is something fairly typcial for many tap waters. Usage: 1-2 tsp. per 5 gallons
$7.99
-
Potassium Bicarbonate - 1Lb
This 1Lb container of Potassium Bicarbonate is an essential ingredient in baking and brewing. It helps to raise the pH levels and can improve the flavor of your food. Potassium Bicarbonate is a safe, natural mineral that helps create a smooth, neutral flavor in your recipes without leaving a bitter taste.
$17.99
-
Whirlfloc Tablets - 1 Lb
Whirlfloc tablets, derived from Irish Moss, are a convenient way to add clarity to your homebrew. Add one tablet during the last 5 minutes of the boil for optimal clarity. Whirlfloc tablets provide a natural, concentrated source of proteins and polyphenols for superior beer clarity.
$29.99
-
Calcium Chloride - 1Lb
Calcium Chloride is often used in place of Gypsum as a means of adjusting the mash pH levels. One gram per gallon of water will result in an increased salt level of 72 ppm calcium, 127.5 ppm chloride and 180 ppm hardness. Its effectiveness is unmatched when it comes to ensuring consistent, desired results.
$10.99
-
Phosphoric Acid 10% Solution - 8 oz
This 8-ounce bottle of Phosphoric Acid 10% Solution is an ideal choice for brewers who want to lower the pH of their mash or sparge water. It's more stable than lactic acid at high temperatures, so you can count on the pH to remain consistent even when heating. 10 % Solution
$6.99
-
Gypsum (Calcium Sulfate) - 2 oz
Used in beer making as a water treatment. Gypsum increases hardness and lowers pH. Its use is known to increase the perception of hop flavor compounds in beer. The primary salt used to Burtonize water; Burton water is famous for producing the worlds classic pale ales, such as Bass. Used in winemaking to lower the pH of the must. As calcium sulfate is not removed from water by boiling, when present, it is referred to as permanent hardness. Usage varies depending upon your exact water profile. Additions can range significantly based off your water source. Usage below is something fairly typcial for many tap waters. Usage: 1-2 tsp. per 5 gallons
$1.99
-
Whirlfloc Tablets - 10 tablets
Whirlfloc tablets, derived from Irish Moss, are a convenient way to add clarity to your homebrew. Add one tablet during the last 5 minutes of the boil for optimal clarity. Whirlfloc tablets provide a natural, concentrated source of proteins and polyphenols for superior beer clarity.
$7.99
-
Calcium Chloride - 2 oz
Calcium chloride is used to add both calcium and chloride ions to brewing water. Calcium is needed for proper mash and boil chemistry, and plays a role in many important chemical reactions in brewing. It is used at a rate of 50 to 150 ppm in brewing water. Chloride ions bring out fullness and body in a beer, and are used at a rate of 0 to 250 ppm in brewing water. One gram per gallon adds around 70 ppm of calcium and around 125 ppm of chloride.
$6.99
-
Lactic Acid 88% - 32 oz
88 percent lactic acid solution. Lactic acid is a chemical compound that provides a pleasant tangy acidity found in many fermented foods and beverages such as wine, yogurt, sourdough bread and kombucha tea. It is used in the beer brewing process to reduce pH and increase acidity. Liquid lactic acid solution for wine and other food and beverage applications Provides a pleasant, tangy acidity found in fermented foods including wine, yogurt, sourdough and kombucha tea Food-grade 88 percent solution Volume: 32oz
$26.50
-
Burton Water Salts - 1 Lb
Also known as brewing salts, it is a mixture of gypsum, potassium Chloride and Epsom salt. 1 tsp adds 1119 ppm per 1 gallon. For pale ales in the burton on Trent Style. Burton salts can come in either crystal or powdered form. Adding 30G per 5 gallons will provide: 266 ppm CA, 63 ppm mg, 159 ppm carbonate; 631 ppm sulfate.
$19.99
-
Dried Tangerine Peel - 1 Lb
Tangerine peel is here! The dried peel of the tangerine fruit, this is used in the brewing process to add a distinct and refreshing tangerine flavor and aroma to beer. Generally it is added at the end of the boil, anytime in the last 10 minutes. With the explosion of citrus IPAs and pale ales, this is a great way to add some extra tangerine character to your beer! It can also be used in fruit beers, wheat beers, hefeweizens and Belgians of all kinds! PRODUCT FEATURES Dried tangerine peel, ready to use in your brew! Adds a distinct and refreshing tangerine flavor and aroma to beer Great for a range of beer styles, from citrus IPAs and pale ales to wheat beers and Belgians!
$25.50
-
Dried Tangerine Peel - 1 oz
Tangerine peel is here! The dried peel of the tangerine fruit, this is used in the brewing process to add a distinct and refreshing tangerine flavor and aroma to beer. Generally it is added at the end of the boil, anytime in the last 10 minutes. With the explosion of citrus IPAs and pale ales, this is a great way to add some extra tangerine character to your beer! It can also be used in fruit beers, wheat beers, hefeweizens and Belgians of all kinds! PRODUCT FEATURES Dried tangerine peel, ready to use in your brew! Adds a distinct and refreshing tangerine flavor and aroma to beer Great for a range of beer styles, from citrus IPAs and pale ales to wheat beers and Belgians!
$3.99
-
Irish Moss - 1 Lb
Irish Moss is a clarifying agent used by brewers to achieve crystal-clear beer. This red seaweed, or carrageen, helps proteins from the hot break settle out of solution. Use 1 tsp. of Irish Moss per 5 gallons during the last 20 minutes of the boil for the best results.
$19.99
-
Irish Moss - 1 oz
Irish Moss is a clarifying agent used by brewers to achieve crystal-clear beer. This red seaweed, or carrageen, helps proteins from the hot break settle out of solution. Use 1 tsp. of Irish Moss per 5 gallons during the last 20 minutes of the boil for the best results.
$2.50
-
Natural Pecan Flavoring Extract - 4 oz
This is a natural pecan flavoring that can be used in the beer or winemaking process. It would work well to give a pecan nuttiness to beer, and can be used to make pecan porters and stouts. Made from all natural ingredients, its recommended dosage is up to 4 ounces for a 5 gallon batch of beer, or added to wine to taste. It can be added in the secondary or to taste at bottling or kegging time. Directions for use: Start with adding 1 oz of flavoring per 1 gallon of your beer or wine. From there you may add until you are happy with the taste. If you are bottling, add to the wort when you add the priming sugar. If you are kegging, add when the beer is poured into the keg. If you are using with wine, add to bottle-ready wine in the fermenter about 1 week before it will be bottled. Make sure to stir gently.
$8.99
-
Natural Hazelnut Flavoring Extract - 4 oz
Hazelnut flavoring can be used in a brown ale in order to make a wonderful hazelnut brown! This hazelnut flavoring uses 100% natural flavoring agents. For beer, use 3 to 4 fl oz. per 5 gallons. Add directly to secondary fermenter or to taste at bottling/kegging time. Directions for use: Start with adding 1 oz of flavoring per 1 gallon of your beer or wine. From there you may add until you are happy with the taste. If you are bottling, add to the wort when you add the priming sugar. If you are kegging, add when the beer is poured into the keg. If you are using with wine, add to bottle-ready wine in the fermenter about 1 week before it will be bottled. Make sure to stir gently.
$8.99
-
Natural Watermelon Flavoring Extract - 4 oz
This would make a great addition to a summery wheat ale or a light beer in order to lend a refreshing watermelon character to the beer. This watermelon flavoring uses 100% natural flavoring agents. For beer, use 4 fl oz. per 5 gallons. Add directly to secondary fermenter or to taste at bottling/kegging time. Directions for use: Start with adding 1 oz of flavoring per 1 gallon of your beer or wine. From there you may add until you are happy with the taste. If you are bottling, add to the wort when you add the priming sugar. If you are kegging, add when the beer is poured into the keg. If you are using with wine, add to bottle-ready wine in the fermenter about 1 week before it will be bottled. Make sure to stir gently.
$8.99
-
Natural Butterscotch Flavoring Extract - 4 oz
This butterscotch flavoring uses 100% natural flavoring agents! For beer or wine, use 1 to 4 fl oz. per 5 gallons. Add directly to secondary fermenter or to taste at bottling/kegging time. Can be used in a range of beer styles. Try this in a dark beer such as a stout for a refined butterscotch flavor! Directions for use: Start with adding 1 oz of flavoring per 1 gallon of your beer or wine. From there you may add until you are happy with the taste. If you are bottling, add to the wort when you add the priming sugar. If you are kegging, add when the beer is poured into the keg. If you are using with wine, add to bottle-ready wine in the fermenter about 1 week before it will be bottled. Make sure to stir gently.
$8.99
-
Natural Pineapple Flavoring Extract - 4 oz
This is a pineapple flavoring that can be used in the beer or winemaking process. It would work well in a wide range of beers and wines. It would work well in an IPA to make a pineapple IPA, or in Belgian beers and sours to accentuate some of the fruity esters. Made from all natural ingredients, its recommended dosage is up to 4 ounces for a 5 gallon batch of beer, or added to wine to taste. It can be added in the secondary or to taste at bottling or kegging time. Directions for use: Start with adding 1 oz of flavoring per 1 gallon of your beer or wine. From there you may add until you are happy with the taste. If you are bottling, add to the wort when you add the priming sugar. If you are kegging, add when the beer is poured into the keg. If you are using with wine, add to bottle-ready wine in the fermenter about 1 week before it will be bottled. Make sure to stir gently.
$8.99
-
Natural Orange Flavoring Extract - 4 oz
Natural Orange Flavoring 4 oz Bottle. This orange flavoring uses 100% natural flavoring agents! For beer or wine, use 1 to 4 fl oz. per 5 gallons. Add directly to secondary fermenter or to taste at bottling/kegging time. Can be used in a range of beer styles. Try this in a light beer or a wheat beer for a refined orange flavor! Directions for use: Start with adding 1 oz of flavoring per 1 gallon of your beer or wine. From there you may add until you are happy with the taste. If you are bottling, add to the wort when you add the priming sugar. If you are kegging, add when the beer is poured into the keg. If you are using with wine, add to bottle-ready wine in the fermenter about 1 week before it will be bottled. Make sure to stir gently.
$8.99
-
Natural Grapefruit Flavoring Extract - 4 oz
Natural Grapefruit Flavoring 4 oz Bottle. May be used in beers or ciders where a grapefruit flavor is desired, or in winemaking to add grapefruit flavor to wines or meads. This grapefruit flavoring uses 100% natural flavoring agents. For beer, use 2-4 fl oz. per 5 gallons. Add directly to secondary fermenter or to taste at bottling/kegging time. Directions for use: Start with adding 1 oz of flavoring per 1 gallon of your beer or wine. From there you may add until you are happy with the taste. If you are bottling, add to the wort when you add the priming sugar. If you are kegging, add when the beer is poured into the keg. If you are using with wine, add to bottle-ready wine in the fermenter about 1 week before it will be bottled. Make sure to stir gently.
$8.99
